Rancang Bangun Holder Face Mill dengan Insert Pahat HSS
DOI:
https://doi.org/10.47134/innovative.v1i1.84Keywords:
Face Mill, Mesin Frais, CNC Bubut, HSSAbstract
Penelitian ini merupakan desain dan proses pembuatan holder face mill dengan insert pahat HSS. Tujuan pembuatan holder face mill dengan insert pahat HSS untuk menghemat biaya dalam proses pemesinan. Jika menggunakan holder face mill buatan pabrikan maka biaya akan mahal karena kita akan tergantung menggunakan jenis insert yang sesuai dengan holder. Sedangkan dengan menggunakan holder face mill dengan insert HSS ini, jika insert aus tinggal di asah lagi dan sudah bisa digunakan kembali. Penelitian ini mencakup desain, proses pembuatan, dan hasil pengujian hari holder face mill dengan insert pahat hss. Proses pembuatan holder face mill ini menggunakan mesin CNC bubut, mesin frais, dan mesin bor. Proses pengujian dari holder face mill ini yaitu waktu pergantian insert, run out holder, dan selisih permukaan dari hasil pemesinan holder face mill ini. Hasil dari pengujian holder face mill ini memiliki waktu pergantian insert kurang dari 3 menit, run out 0,055 mm, dan selisih permukaan 0,053 mm sehingga sangat bisa digunakan untuk proses permesinan.
References
Asaad, M. W. (2022). Using Grey Relation Analysis to Improve Tool Life in Medium Carbon Steel Turning by Coating Multilayer HSS Insert. 2022 13th International Conference on Mechanical and Aerospace Engineering, ICMAE 2022, 507–513. https://doi.org/10.1109/ICMAE56000.2022.9852876 DOI: https://doi.org/10.1109/ICMAE56000.2022.9852876
Asaad, W. (2022). Investigation of microstructure, morphology and properties of monolayer and multilayer coating T6-HSS by the sol–gel route. Advances in Materials and Processing Technologies, 9(4), 1594–1620. https://doi.org/10.1080/2374068X.2022.2129518 DOI: https://doi.org/10.1080/2374068X.2022.2129518
Badiger, P. V. (2018). Performance of DLC coated tool during machining of MDN431 alloyed steel. Materials Today: Proceedings, 5(9), 17360–17370. https://doi.org/10.1016/j.matpr.2018.04.149 DOI: https://doi.org/10.1016/j.matpr.2018.04.149
Caicedo, J. C. (2015). TiN[BCN/BN] n/c-BN system improves the surface properties of machining tools used in industrial applications. International Journal of Advanced Manufacturing Technology, 77(5), 819–830. https://doi.org/10.1007/s00170-014-6508-x DOI: https://doi.org/10.1007/s00170-014-6508-x
Chandrasekaran, V. V. (2015). Multivariate analysis of orthogonal tube cutting forces with 3-D tool wear analysis of AISI 1020 alloy steel using cold compressed air versus liquid nitrogen as metal working fluids. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2. https://doi.org/10.1115/IMECE2015-51534 DOI: https://doi.org/10.1115/IMECE2015-51534
Chopra, S. A. (2015). Metallurgy behind the Cryogenic Treatment of Cutting Tools: An Overview. Materials Today: Proceedings, 2(4), 1814–1824. https://doi.org/10.1016/j.matpr.2015.07.119 DOI: https://doi.org/10.1016/j.matpr.2015.07.119
Jonoadji, N., & Dewanto, J. (1999). Pengaruh Parameter Potong dan Geometri Pahat Terhadap Kekasaran Permukaan Pada Proses Bubut. J. Tek. Mesin, 1(1), 82–88. https://doi.org/10.9744/jtm.1.1.pp.82-88
Kalyan, C. (2015). Cutting mode analysis in high speed finish turning of AlMgSi alloy using edge chamfered PCD tools. Journal of Materials Processing Technology, 216, 146–159. https://doi.org/10.1016/j.jmatprotec.2014.09.003 DOI: https://doi.org/10.1016/j.jmatprotec.2014.09.003
Kamaruddin, S. A. (2019). Optimization of surface roughness on CNC milling machining using differential evolution (DE) method. AIP Conference Proceedings, 2129. https://doi.org/10.1063/1.5118173 DOI: https://doi.org/10.1063/1.5118173
Kelliger, T. (2023). Orthogonal cutting with additively manufactured grooving inserts made from HS6-5-3-8 high-speed steel. Materials Research Proceedings, 28, 1235–1244. https://doi.org/10.21741/9781644902479-134 DOI: https://doi.org/10.21741/9781644902479-134
Kriyadeesh, A. (2019). Optimization of input parameters with carbide inserts and HSS tool on CNC turning of EN19 steel. International Journal of Innovative Technology and Exploring Engineering, 8(12), 3869–3875. https://doi.org/10.35940/ijitee.L3374.1081219 DOI: https://doi.org/10.35940/ijitee.L3374.1081219
Mahesh, K. (2021). Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes, 36(7), 753–791. https://doi.org/10.1080/10426914.2020.1843671 DOI: https://doi.org/10.1080/10426914.2020.1843671
Matlygin, G. (2022). Effect of cutting parameters on temperature in the cutting zone in a high-speed steel turn-milling process. Journal of Physics: Conference Series, 2373(3). https://doi.org/10.1088/1742-6596/2373/3/032009 DOI: https://doi.org/10.1088/1742-6596/2373/3/032009
Monkova, K. (2020). Durability and tool wear investigation of HSSE-PM milling cutters within long-term tests. Engineering Failure Analysis, 108. https://doi.org/10.1016/j.engfailanal.2019.104348 DOI: https://doi.org/10.1016/j.engfailanal.2019.104348
Mulyadi. (2009). Analisis Pengaruh Putaran Spindle dan Kecepatan Makan terhadap kekerasan Permukaan Baja SCM 4 Pada proses Milling.
Nugroho, S. (2010). Karakterisasi Pahat Bubut High Speed Steel (Hss) Boehler Tipe Molibdenum (M2) Dan Tipe Cold Work Tool Steel (a8). J. Tek. Mesin, 12(4), 19–26. https://doi.org/10.1520/E2894-12.2
Pahleviannur, M. R. (2022). Penentuan Prioritas Pilar Satuan Pendidikan Aman Bencana (SPAB) menggunakan Metode Analytical Hierarchy Process (AHP). Pena Persada. DOI: https://doi.org/10.31237/osf.io/6ghyz
Pahleviannur, M. R., Wulandari, D. A., Sochiba, S. L., & Santoso, R. R. (2020). Strategi Perencanaan Pengembangan Pariwisata untuk Mewujudkan Destinasi Tangguh Bencana di Wilayah Kepesisiran Drini Gunungkidul. Jurnal Pendidikan Ilmu Sosial, 29(2), 116–126. DOI: https://doi.org/10.23917/jpis.v29i2.9692
Paiva, R. De. (2017). Contribution to sharpening operation of HSS lathe tool bit. Revista Materia, 22(3). https://doi.org/10.1590/S1517-707620170003.0198 DOI: https://doi.org/10.1590/s1517-707620170003.0198
Paramasivam, S. S. S. S. (2019). Multi Characteristics Optimization of Treated Drill Tool in Drilling Operation Key Process Parameter Using TOPSIS and ANOVA Technique. SAE Technical Papers. https://doi.org/10.4271/2019-28-0055 DOI: https://doi.org/10.4271/2019-28-0055
Ristadi, F. A. (2018). Tool holder. Journal Title, 3(April), 55–63. DOI: https://doi.org/10.21831/dinamika.v3i1.19123
Rynio, C. (2022). Mechanical And Tribological Properties Of Copper Infiltrated High-Speed Steel Based Valve Seat Insert Materials With Different Hard Phase Particles. World PM 2022 Congress Proceedings.
Sesharao, Y. (2021). Optimization on operation parameters in reinforced metal matrix of AA6066 composite with HSS and Cu. Advances in Materials Science and Engineering, 2021. https://doi.org/10.1155/2021/1609769 DOI: https://doi.org/10.1155/2021/1609769
Sobron Lubis, R., & Sobron Lubis, R. W. (2017). Pengaruh Variasi Sudut Ujung Mata Potong Karbida Terhadap Kekasaran Dan Topografi Permukaan Logam Al 6061 Pada Proses Pembubutan. Journal Title, 15, 18–25. DOI: https://doi.org/10.24912/poros.v15i1.1251
Suharyadi, K., & Irfa’i, M. A. (1999). Pengaruh Jumlah Mata Sayat End Mill Cutter Menggunakan Kode Program G 02 Dan G 03 Terhadap Kerataan Alumunium 6061 Pada Mesin CNC TU-3A.
Susilo W., D., Zainuddin, & Raharjo, B. (2013). Pengaruh Sudut Penyayatan dan Jumlah Mata Sayat End Mill Cutter Terhadap Tingkat Kekerasan Permukaan Baja ST 40 Hasil Pemesinan CNC Milling Tosuro Kontrol GSK 983 Ma-H.
Thampi, V. V. A. (2016). Nanostructured TiCrN thin films by Pulsed Magnetron Sputtering for cutting tool applications. Ceramics International, 42(8), 9940–9948. https://doi.org/10.1016/j.ceramint.2016.03.095 DOI: https://doi.org/10.1016/j.ceramint.2016.03.095
Thavale, V. T. (2020). Wear behavior and machinability of hot pressed sintering of B4C reinforced M3/2 HSS composite. Materials Today: Proceedings, 44, 4891–4897. https://doi.org/10.1016/j.matpr.2020.11.710 DOI: https://doi.org/10.1016/j.matpr.2020.11.710
Velraja, K. (2023). Analysis of DC magnetron sputtered coated with distinct inserts in CNC machining process. Measurement: Sensors, 27. https://doi.org/10.1016/j.measen.2023.100815 DOI: https://doi.org/10.1016/j.measen.2023.100815
Venkateswaran, D. (2023). Comparing carbide, PCD, drill insert with HSS drill bit for material removal rate in the drilling of Al6061/SiC/AlO composite using Taguchi method. AIP Conference Proceedings, 2822(1). https://doi.org/10.1063/5.0173237 DOI: https://doi.org/10.1063/5.0173237
Vennila, C. B. (2023). Comparison of carbide, PCD drill insert with HSS drill bit for cutting time in drilling of novel coffee bean powder reinforced polymer composite. AIP Conference Proceedings, 2655. https://doi.org/10.1063/5.0139968 DOI: https://doi.org/10.1063/5.0139968
Vikram, K. A. (2015). Assessment of surface roughness and MRR while machining brass with HSS tool and carbide inserts. Indian Journal of Engineering and Materials Sciences, 22(3), 321–330.
Widarto B. S. Wijanarka, S., & Paryanto. (2008). Teknik Pemesinan.
Zainuddin. (2019). Analisis Tingkat Kekasaran Permukaan Pada Hasil Pemesinan Mesin Milling Dengan Variasi Tinggi Pencekaman Benda Kerja Dan Tinggi Pemasangan Endmill Cutter. Media Mesin Maj. Tek. Mesin, 20(2), 17–24. https://doi.org/10.23917/mesin.v20i2.8531 DOI: https://doi.org/10.23917/mesin.v20i2.8531
Zhang, E. G. (2016). Properties and cutting performance of tialsin coating prepared by cathode ARC ion plating. Surface Review and Letters, 23(6). https://doi.org/10.1142/S0218625X16500554 DOI: https://doi.org/10.1142/S0218625X16500554
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ahmad Ridwanul Muwafiq, Mulyadi Mulyadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
